E
EJU01171
Submerged watercraft
If the watercraft is submerged or flooded with water, follow the procedure below and consult a Yamaha dealer as soon as possi- ble. Failure to do so may result in serious engine damage!
1.Beach the watercraft and remove the stern drain plugs to drain the water from the engine compartment.
2.Turn the fuel cock knob to “OFF.”
3.Remove the spark plugs and dry them with a cloth.
4.Without reinstalling the spark plugs, crank the engine until all the water in the cylinders has been drained.
5.Install the stern drain plugs and the spark plugs.
6.Turn the fuel cock to “ON.”
7.Launch the watercraft into the water, and then run the engine for at least 10 min- utes. If the engine will not start, repeat steps above.
8.Turn the engine off. Turn the fuel cock to “OFF.”
9.Remove the silencer cap and spray a rust inhibitor such as Yamaha
10.Have the watercraft inspected by a Yamaha dealer as soon as possible.