E
EJU01218
Shift lever
The shift lever is located on the starboard side of the watercraft and is used to control the reverse gate, which allows the watercraft to move into reverse or forward.
When in the reverse position, the water- craft can be launched from a trailer, or backed up out of tight spots where you cannot turn around easily.
To shift into reverse:1.Release the throttle, and then let the engine speed return to idle.
2.Pull the shift lever toward you.
WARNING
●Make sure that the throttle is com- pletely released and that the engine is at idle before shifting into reverse.
●Do not use the reverse function to slow down or stop the watercraft as it could cause you to lose control, be ejected, or impact the handlebars.
●Use reverse for●Make sure that there are no obstacles or people behind you before shifting into reverse.
●Do not touch the reverse gate while the shift lever is being operated, otherwise you could be pinched.
To shift into forward:1.Release the throttle, and then let the engine speed return to idle.
2.Push the shift lever away from you.