20 Operating Basics
01V96i—Owner’s Manual
Selecting Display Pages
To select a display page:
1. Press the corresponding button on the
top panel to select the desired page
group.
Display pages are grouped by function. To select a
page group, press the desired button in the DIS-
PLAY ACCESS section.
2. You can select pages that have cur-
rently-displayed tabs by pressing the
[F1]–[F4] buttons.
If the selected display page group contains multiple
pages, press the [F1]–[F4] buttons below the corre-
sponding tab to select a specific page.
3. To select a page for which a tab is not cur-
rently displayed, press either the Left or
Right [ ]/[ ] Tab Scroll button
(depending on where the page is
located) to display the page tab, then
press the corresponding [F1]–[F4] but-
ton.
If display page groups contain more than four
pages, either the left or right arrow appears. To dis-
play the currently-hidden tabs, press the Right or
Left [ ]/[ ] Tab Scroll button.
You can also select a page from a page group as fol-
lows:
• Selecting the next page in a page group:
Press the button you selected in Step 1 repeatedly.
This enables you to select a page that has a hidden
tab.
• To select the previous page in a page group:
Press and hold down the button you selected in Step
1. The screen steps back through the pages one by
one. Release the button when the desired page is
displayed. This enables you to select a page that has
a hidden tab.
• To select the first page in the group:
Double-click the button you selected in Step 1.
4. Press the cursor buttons to move the cur-
sor (a bold frame) to a button, parameter
box, rotary control, or fader so that you
can change the value.
Display Interface
This section describes how to use the display interface.

Rotary Controls & Faders

The rotary controls and fad-
ers enable you to adjust the
continuously variable param-
eter values, including Input
Channel levels and effects
parameters. Press the cursor
buttons to move the cursor to
a rotary control or fader you
want to adjust, then rotate the
Parameter wheel or press the
[INC]/[DEC] buttons to
modify the value.

Buttons

The buttons enable you to turn
certain functions on (enabled) or
off (disabled). Move the cursor to
the appropriate button, then press
the [ENTER] button to turn the function on (high-
lighted) or off. The buttons also enable you to sele ct one
of two options or to execute certain functio ns.

Parameter Boxes

The parameter boxes enable
you to select one of multiple
options. Press the cursor but-
tons to move the cursor to a
parameter box, then rotate
the Parameter wheel or press the [INC]/[DEC] buttons
to select the setting.
You may need to press the [ENTER] button to confirm
a change in certain parameter boxes. If you edit a value
in this type of parameter box, the value flashes. Press the
[ENTER] button to confirm the change, and the flash-
ing stops. If you move the cursor to other parameters
while the edited value is flashing, the edit is cancelled.
Tip: The 01V96i remembers the current page and
parameter when you select a new page group. If you
return to the previous page group, the 01V96i displays
the correct page, with the same parameter selected.