44 Tutorial
01V96i—Owner’s Manual
Creating a Custom Layer by Combining Channels (User Assignable Layer)
If you set the Remote Layer target to “USER ASSIGN-
ABLE,” you can create a custom layer by combining any
01V96i channels (excluding the Stereo Out). This cus-
tom layer is called “User Assignable layer.”
1. Press the DISPLAY ACCESS [DIO/SETUP]
button repeatedly until the DIO/Setup|
Remote page appears.
2. Set the TARGET parameter to USER
ASSIGNABLE, then press [ENTER].
A confirmation window appears.
3. Move the cursor to the YES button, then
press [ENTER].
The 01V96i displays the page shown below.
4. Select the channels you wish to assign to
the User Assignable layer using the 1–16
parameter boxes (1).
You can store up to four 16-channel setups in four
banks by switching Banks 1–4 via the BANK 1–4
buttons. If you press[ENTER] before selecting the
channels to assign, you will still be able to select the
channels you wish to assign in the User CH Select
window.
5. Use the LAYER [REMOTE] button to
assign or recall the User Assignable layer.
You can use the faders and [ON] buttons to control
the assigned channels.
Tip: You can reset the assignment to default by moving
the cursor to the CLEAR button and pressing
[ENTER].
1