Operating Basics 19
01V96i—Owner’s Manual
Operating Basics
Operating BasicsThis chapter describes basic operations on the 01V96i,
including how to use the display and operate the con-
trols on the top panel.
About the Display
The top panel display indicates various parameters that
you must set before you can operate the 01V96i. The
display indicates the following items:
1Selected DISPLAY
This section indicates the currently-selected display
page group.
2Selected channel
This section indicates the Input or Output Channel
currently selected by its corresponding [SEL] but-
ton. The first four characters are the Channel ID
(e.g., CH1–CH32, BUS1–BUS8, AUX1–AUX8,
ST-L, ST-R). The second four characters are the
channel’s Short name. You can edit the short name
if you desire (see page43).
3Current Scene
This section indicates the number and title of the
currently-selected Scene memory. If the selected
Scene is write-protected, a padlock icon ( )
appears.
4EDIT indicator
This indicator appears when the current mix set-
tings no longer match those of the Scene that was
most-currently recalled.
5MIDI indicator
This indicator appears when the 01V96i is receiving
MIDI data via the MIDI IN port, USB port, or an
installed card.
6Surround mode indicator
This indicator identifies the currently-selected Sur-
round mode (ST=stereo, 3-1, 5.1, or 6.1).
7Sampling rate indicator
This indicator identifies the 01V96i’s current sam-
pling rate: 44.1 kHz (44k), 48 kHz (48k), 88.2 kHz
(88k), or 96 kHz (96k).
8ST IN channel levels
These level controls indicate the level of ST IN
channels 1–4.
9Page title
This section indicates the title of the current page.
0Channel name
On certain pages, this area displays t he Long name
of the channel currently selected by the [SEL] key or
the channel selected by the cursor keys.
APage area
This page area displays various page contents.
BPage tabs
These tabs enable you to select a display page.
CTab Scroll arrows
These arrows indicate that more pages are available.