Yukon Advanced Optics Oil Furnace Furnace Features - Eagle II - Polar, uYUKONTROL SOLID-STATE

Models: Oil Furnace

1 64
Download 64 pages 37.66 Kb
Page 8
Image 8
Furnace Features - Eagle II - Polar

Furnace Features - Eagle II - Polar

uYUKONTROL SOLID-STATE

FURNACE CONTROL This is the solid-state

control that coordinates the gas or oil burner function with the wood/coal damper so that your home is always comfortable using your choice of fuels.

vMORE HEAT EXCHANGE SURFACE MEANS LESS HEAT UP THE CHIMNEY

The 8-inch diameter type 304 Stainless Steel secondary heat exchanger recovers heat that would normally go out the chimney. This added surface plus the large firebox and massive primary heat exchanger provide a total of 82 square feet of heating surface compared to 30-35 square feet on a comparable size oil or gas furnace.

wGAS BURNER OPTION FOR AUXILIARY FUEL Our gas model comes with a Wayne Model

P250 AF DIN hi-efficiency gas burner. This burner features a Honeywell electronic ignition and gas valve. It is certified by Underwriters Laboratories to provide up to 80.1% steady state efficiency. It can be switched from LP Gas to Natural Gas or visa- versa. This burner can be interchanged with our Wayne model MSR oil burner at your option.

x2 DIFFERENT STYLES OF HEAVY CAST IRON GRATES It is imperative that 80 percent

of the air for combustion enters the firebox from below a wood/coal grate to insure an efficient and clean burning fire. Our standard heavy cast iron grate is adequate for a wood fire. A much heavier cast iron shaker grate is also available as an option for dense coal use.

{AFTER-BURNERTMJET SYSTEM GIVES MAXIMUM SOLID FUEL BURNING

EFFICIENCY It extracts maximum BTUs from the wood or coal. Superheated air is introduced above the fire to ignite and extract heat from the unburned combustible gases. Without this feature, up to 40% of the available solid-fuel energy would be wasted.

OIL BURNER OPTION FOR AUXILIARY FUEL If oil is your preference for a back-up fuel,

your burner will be a Wayne model MSR 321-009 hi-efficiency oil burner. Features are a Stainless Steel flame retention head and Honeywell Premium controls. It is certified by Underwriters Laboratories to provide up to 80.1 % steady state efficiency. If at some time in the future, you decide you would rather have LP or Natural Gas as your backup fuel, this burner can be interchanged with our Wayne P250 AF DIN gas burner. (A nice insurance policy.)

}AIR CIRCULATING BLOWER AND MOTOR The EAGLE II is designed with 10 inch wide, ten inch- diameter belt drive blower. This oversized blower turns slower than ordinary furnaces because of its large size. It is therefore quieter than most furnaces, Each EAGLE II is equipped with a premium Class A motor with Class B insulation, which means it will operate in a higher temperature atmosphere. This motor also features a 1.35 service factor, which means it has 35% more power than a standard motor of the same size. Up to 5 tons (60,000 BTU’s) of air conditioning can be

yA SEPARATE OIL OR GAS FIRE CHAMBER ENGINEERED FOR THOSE FUELS This is an important feature. The chamber

is lined with PYROLITETM, an extremely high temperature resistant ceramic material. It assures efficient combustion of oil or gas, and directs those flames into the wood burning chamber for automatic ignition of the wood fire.

zFIRE BRICK LINING EXTENDS

FURNACE LIFE Every Eagle furnace features two inch thick fire brick, 18" high. Fire brick is used, not only because of its lasting quality, but because it

8

Page 8
Image 8
Yukon Advanced Optics Oil Furnace Furnace Features - Eagle II - Polar, uYUKONTROL SOLID-STATE, zFIRE BRICK LINING EXTENDS