Before the first use of the appliance
Before using the appliance remove all packaging, including the advertising labels and any protective film.
)Whentime: using the hob for the first
1)place on all the plates a pan filled with some water;
2)switch the plates on for about 10 minutes at “maximum” position until water inside the pans boils;
3)then, turn the control knob to “minumum” and allow the plates to run for approximately 20 minutes;
4)open a window for ventilation.
During this time, the plates may smoke a little and an unpleasant odour may be emitted. This is absolutely normal and it is caused by residues of manufacturing.
Once this operation is carried out, let the plates to cool down, then clean them with a soft cloth soaked in warm water.
Operation
Electric Hotplates
To switch on a hotplate, turn the relevant control knob anticlockwise to the required heat setting.
The control knob is numbered 1 - 6
0- OFF
1- Minimum
6- Maximum
Fig. 1 |
Fig. 2
6
