ZPL II Commands for RFID
Printer and Firmware Compatibility

58978L-008 Rev. A RFID Programming Guide 11/14/2008

83

^RQ onpage 105 Quick Write EPC Data and Passwords *

(R60.15.7Z or
later)
* *
(R62.15.7Z
orlater)
——————*——

^RR onpage 107 Specify RFID Retries for a Block *** ********—

^RS onpage 108 Set Up RFID Parameters *** ******* b * *

^RT onpage 115 Read RFID Tag * c * c * c * c * c * c * c * c * c * c * c *

~RV onpage 117 Report RFID Encoding Results *** **

(SP994J
or later)
*
(SP999C
or later)
****——

^RW onpage 118 Set RF Power Levels for Read and Write *** ********—

^RZ onpage 120 Set RFID Tag Password and Lock Tag *** *******——

^WF onpage 123 Encode AFI or DSFID Byte ——— ———————*—

^WT onpage 125 Write (Encode) RFID Tag * d * d * d * d * d * d * d * d * d * d * d *

^WV onpage 127 Verify RFID Encoding Operation *** *******——

Table 8 • Supported Commands Based on Printer and Firmware (Continued)
Command Function
UHF Printers HF Printers
R110Xi
and R170Xi
RZ400 and RZ600
R110PAX4
R4Mplus
RP4T
R110Xi HF
R2844-Z
Firmware
all
R53.16.X
R62.X.X
R63.X.X
SP994X
SP999X
SP1027X
SP1056X
SP1082X
all
all
all
* = Supported — = Not supported
a. Not ^FH capable. Also, parameters t and a do not app ly. b. For parameter e, the only accepted value is N for No Action.
c. Use the ^RF, ^RM, and ^RR commands rather than the ^RT command. d. Use the ^RF, ^RM, ^RR, and ^WV commands rather than the ^WT command.