ZPL II Commands for RFID
Printer and Firmware Compatibility
11/14/2008 RFID Programming Guide 58978L-008 Rev. A
82
Printer and Firmware Compatibility

Table 8 shows which RFID ZPL commands you can use with different printers and firmware versions.

Table 8 • Supported Commands Based on Printer and Firmware

Command Function
UHF Printers HF Printers
R110Xi
and R170Xi
RZ400 and RZ600
R110PAX4
R4Mplus
RP4T
R110Xi HF
R2844-Z
Firmware
all
R53.16.X
R62.X.X
R63.X.X
SP994X
SP999X
SP1027X
SP1056X
SP1082X
all
all
all
^HL or ~HL
onpage 84 Return RFID Data Log to Host *** * * * * * ***—
^HR onpage 85 Calibrate RFID Transponder Position *** * * * * * ***—
^HV onpage 88 Host Verification * ** * * * * * **a**
^RA onpage 91 Read AFI or DSFID Byte ——— — — — — — ——*—
^RB onpage 93 Define EPC Data Structure *** * * * * * ***—
^RE onpage 95 Enable/Disable E.A.S. Bit ——— — — — — — —— **
^RF onpage 96 Read or Write RFID Format *** * * * * * ***—
^RI onpage 100 Get RFID Tag ID *
(R60.13.0.13ZD
or later)
**
(R62.13.0.13ZC
or later)
*
(R63.13.0.11Z
or later)
* * * * ****
^RM onpage 101 Enable RFID Motion *** * * * * * ***—
^RN onpage 102 Detect Multiple RFID Tags in Encoding Field *
(R60.13.0.3
or later)
** — — — — — —**—
~RO onpage 103 Reset Advanced Counters *** * * * * * ***—
* = Supported — = Not supported
a. Not ^FH capable. Also, parameters t and a do not app ly. b. For parameter e, the only accepted value is N for No Action.
c. Use the ^RF, ^RM, and ^RR commands rather than the ^RT command. d. Use the ^RF, ^RM, ^RR, and ^WV commands rather than the ^WT command.