English

3. Warning labels on the machine

(1)Read owner's manual before operating this machine.

(2)Wear head, eye and ear protection.

(3)Warning/Attention

(4)Keep all children, bystanders and helpers 15 meters away from the brushcutter

IMPORTANT

If warning label peel off or become soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).

WARNING

Never modify your brushcutter.

We won't warrant the machine, if you use the remodeled brushcutter or you don't observe the proper usage written in the manual.

4. Symbols on the machine

For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to take a mistake.

(a)The port to refuel the "MIX GASOLINE" Position: FUEL TANK CAP

(b)The direction to close the choke Position: AIR CLEANER COVER

(c)The direction to open the choke Position: AIR CLEANER COVER

(d)If you turn the rod by screwdriver follow the arrow to the “MAX” position, the chain oil flow more, and if you turn to the “MIN” position, less.

Position: Bottom of the GEAR CASE

EMISSION CONTROL

An emission control label is located on the engine.

IMPORTANT ENGINE INFORMATION

THIS ENGINE MEETS U.S. EPA PH2 AND 2006

CALIFORNIA EMISSION REGULATIONS FOR SI

SORE’s. COMPLIANCE PERIOD : CATEGORY A

ENGINE FAMILY : 6KZXS.0244XY ; EM

ENGINE DISPLACEMENT : 24cc

REFER TO OWNER’S MANUAL FOR MAINTE-

NANCE SPECIFICATIONS AND ADJUSTMENTS.

MANUFACTURED:

MADE IN JAPAN

8

Page 8
Image 8
Zenoah EXZ2401S manual Symbols on the machine, Emission Control