Zenoah EXZ2401S manual Operation EX2-BC only, English Optional blade usage

EX2-BC OP4

EX2-BC OP5

EX2-BC OP6

EX2-BC OP7

English (Optional blade usage)

8. Operation (EX2-BC only)

IMPORTANT

Change the loop handle to the J-handle for safe operation. (OP4)

(1)Bracket : 3583-14101

(2)J-handle : 6367-14200

■STARTING THE ENGINE

Please refer 5.For safe operation (P.14), 8.Operation (P.36).

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment could rotate as soon as the engine is started. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OP5)

■CUTTING METHOD

a)Use the front left side cutting.

b)Guide the blade from your right to left with it tilted slightly to your left. (OP6)

c)When mowing a wide area, start working from your left end to avoid interference of cut grass.

d)The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting depth according to the condition of object.

WARNING

•If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged.

•Turn off the engine and make sure the blade has completely stop before checking the blade, and removing any object got caught in.

46