English
6. Installing guide bar and saw chain
F6-5
(3)
(2) (1)
(4) (4)
IMPORTANT
While temporary tightening, you may hear the “click” sound. But do not stop tightening at that time. This sound does not mean that the saw chain and guide bar were assembled.
5.While holding the chain cover, temporary tighten the nut assembly and fix the bar and chain cover. (You can fix them even by tightening the lever.)
Check if the saw chain fits on the bar rail. If not, readjust by loosen the nut assembly.
(1) | Nut assembly (2) Chain cover |
(3) | Lever (4) Proper tension, No gap |
F6-6
(3)
(1)
(2)
6.After fixing them, attach the bar protector for your safety.
Pull the lever up and tighten it securely.
| Tightening torque: |
| 7.9 ~ 12.8 N·m |
(1) | Lever (2) Bar protector |
(3) | Fully tighten |
F6-7
(1)
(2)
7.If the chain becomes loose while using the unit, attach the bar protector and loosen the nut assembly around 4 turns.
Dismount the protector and check if the chain fits on the bar rail. If not, readjust by loosen the nut assembly.
Temporary tighten the nut assembly. The chain is to be tensioned automatically. After fixing the guide bar, mount the protector and tighten the lever securely for fully tightening.
(1) Loosen (2) Bar protector
NOTE
A new chain will expand its length in the beginning of use. Check and readjust the tension frequently as a loose chain can easily derail or cause rapid wear of itself and the guide bar.
20
