English

4. Symbols on the machine

 

 

For safe operation and maintenance,

 

 

symbols are carved in relief on the

 

 

machine.

 

 

According to these indications, please

 

 

be careful not to make any mistake.

 

 

 

(a)

(a) The port to refuel “MIX GASOLINE”

 

 

Position: Fuel cap

 

 

 

 

(b) The port to top up chain oil

(b)

 

 

Position: Oil cap

 

 

 

 

 

(c)

(c) Setting the switch to the “O” position, the engine

 

 

stops immediately.

 

 

 

 

Position: Rear-left of the unit

 

 

(d) Starting the engine. If you pull out the choke knob

(d)

 

 

(at the back-right of the rear handle) to the point of

 

 

 

 

the arrow, you can set the starting mode as follows:

 

 

First-stage position – starting mode when the

 

 

engine is warm.

 

 

Second-stage position – starting mode when the

 

 

engine is cold.

 

 

Position: Upper-right of the aircleaner cover

 

 

(e) The screw under the “H” stamp is The High-speed

(e)

 

 

adjustment screw.

 

 

 

 

The screw under the “L” stamp is The Slow-speed

 

 

adjustment screw.

 

 

The screw at the left of the “T” stamp is the Idle

 

 

adjustment screw.

 

 

Position: Left side of the rear handle

 

 

 

(f)

(f) Shows the directions that the chain brake is

 

 

released (white arrow) and activated (black arrow).

 

 

Position: Front of the chain cover

(g)

(g) If you turn the rod by screwdriver follow the arrow

to the "MAX" position, the chain oil flow more, and if

 

 

you turn to the "MIN" position, less.

 

 

Position: Bottom of the power unit

 

 

EMISSION CONTROL

 

 

An emission control label is located on the engine.

 

 

IMPORTANT ENGINE INFORMATION

 

 

THIS ENGINE CONFORMS TO U.S. EPA PH1

 

 

FOR SMALL OFF-ROAD ENGINES.

 

 

COMPLIANCE PERIOD : CATEGORY A

 

 

ENGINE FAMILY : 7KZXS.0324RS ; EM*1

 

 

ENGINE DISPLACEMENT : 32cc

 

 

REFER TO OWNER'S MANUAL FOR MAINTE-

 

 

NANCE, SPECIFICATIONS AND ADJUSTMENTS.

 

 

MANUFACTURED:

 

 

ZENOAH CO.,LTD.

 

 

USE JASO FC OR ISO EGC GRADE 50:1 OIL.

 

 

*1: The initial number will be changed every year of

 

 

manufacturing.

8

Page 8
Image 8
Zenoah G3200EZ manual Symbols on the machine, Position Fuel cap, Position Oil cap, Emission Control