Zonet Technology 802.11 g 54Mbps Wireless LAN CardBus Adapter user manual

	WEP function.
	Enable: It means that the
	connected device uses WEP
	function.
Channel	In infrastructure mode, it indicates
	the channel number the associated
	access point uses. In
	Ad hoc mode, it indicates the
	channel number the adapter uses.
Signal	The blue bar indicates the signal is
Strength	weak or strong. The longer the blue
	bar is, the stronger the signal is.
Link	The blue bar indicates the link
Quality	quality is good or bad. The longer
	the blue bar is, the better link quality
	is.
Re-Scan	Click this button and then the card
	will start to re-scan other wireless
	devices in service range.

3.3Wireless LAN Adapter Utility – Configuration Tab

Click the Configuration Tab and the following information will be displayed. The top pane of this page is to remove or save configuration settings. You can configure the wireless network adapter through the bottom pane of this page. The bottom pane includes three sub-tabs locating on the right side. Click each sub-tab, and the corresponding items will be displayed on the bottom pane of Configuration tab. Remember to click Apply button after your configuration; otherwise, the changes you make won’t take effect.

Wireless LAN CardBus Adapter