¾G if the network includes only 802.11g devices
•At Wireless Operation, select
¾AP if you are using the AP+4 as a Router/Access Point or a Repeater
¾Client if you are using the AP+4 as an Ethernet Client
¾WDS if you want to use the AP+4 as a Repeater in WDS (Wireless Distribution System) mode.
¾AP+WDS if you want the AP+4 to operate as both an Access Point and a Repeater in WDS mode.
•At Network Type (available only if the AP+4 is operating as a Client) select Infrastructure (most users) or Ad Hoc.
•At SSID (Service Set IDentifier), enter a network name. All wireless devices on your network should use the same name.
•At Channel Number (available only if you selected Ad Hoc channel as your Network Type), select a channel number that isn’t being used by another nearby network. If you are unsure which channel to use, try Channel 6.
•Select Enable MAC Clone if for some reason you want to use the MAC address of a device in the network instead of the AP+4’s MAC address.
•Enable Universal Repeater Mode (unavailable)
¾SSID of Extended Interface (unavailable)
Click Next to continue.
12 | Zoom AP+4 User Guide |