WDS Settings
AWireless Distribution System (WDS) expands a wireless network by using multiple Access Points connected wirelessly. All APs must use the same channel.
To use the AP+4 as a Repeater, on the Wireless Basic Setup page at the Mode option, select AP+WDS. Then, on the WDS Settings page, enter the MAC addresses of access points you are communicating with.
Parameter | Select or enter . . . |
Enable WDS | Select the check box to enable WDS. |
|
|
Add WDS AP | Enter Access Point MAC addresses, one at a |
| time. |
| • Click Apply Changes after each entry. The |
| AP MAC addresses appear one at a time in |
| the Current WDS AP List. |
| • Click Reset to clear the current entry before |
| you apply the change. |
| • Click Set Security to open the Wireless |
| Security Setup page and configure |
| security for the additional AP. The security |
| method must be the same as on the AP+4. |
| • Click Show Statistics to display Transmit |
| and Receive information for each |
| configured AP. |
|
|
28 | Zoom AP+4 User Guide |