Parameter | Select or enter . . . |
Disable WPS | Select this check box to turn off WPS. By |
| default, WPS is enabled. |
|
|
Self PIN Number | (Display only) Automatically generated AP+4 |
| PIN. For a different number, click Regenerate |
| PIN. |
Push Button | To have the AP+4 search for another WPS- |
Configuration | enabled device for 2 minutes, click Start PBC. |
(PBC) | The network device you want to configure must |
| be turned on, have WPS enabled, be within |
| range of the AP+4, and – as noted above – |
| must have a hardware or software pushbutton. |
| After you click Start PBC, go to the device and |
| press or click its pushbutton. |
|
|
Apply Changes | Click to save your settings. |
|
|
Reset | Click to return to the defaults. |
|
|
Client PIN Number | Enter the network device's PIN number. Look |
| for a sticker on the device or a display showing |
| the PIN. |
|
|
Start PIN | Click this button to initiate the security setup |
| process. The device must be turned on, have |
| WPS enabled, and be within range of the AP+4 |
| – approximately 150 feet , but this may vary |
| greatly depending on the environment. |
|
|
To confirm that WPS automatic configuration has been successful, on the menu select Wireless, and on the Wireless Basic Settings page click Show Active Clients:
Chapter 4. Wireless Configuration | 35 |