Local Site

Select Subnet Address or Single Address

Local IP

Enter 10.0.0.0

Address/Network

 

Local Subnet

(If Subnet Address is selected) Enter

Mask

255.255.255.0

Remote Site

Select Subnet Address, Single Address,

 

Any Address, or NAT-T Address

Remote Secure

Enter the WAN IP address of the remote VPN

Gateway

connection.

Remote IP

Enter the LAN IP address or the LAN network

Address/Network

IP address of the remote VPN connection.

Remote Subnet

Enter the Subnet Mask of the remote VPN

Mask

connection.

Local/Peer ID

These four options let you limit use of the VPN

 

to a single user at each end of the tunnel.

Local ID Type

Select the type of identification entered by the

 

user at the local site: IP, DNS (URL), or Email.

Local ID

Enter the local user’s IP address, URL, or

 

email address.

Remote ID Type

Select the type of identification entered by the

 

user at the remote site: IP, DNS (URL), or

 

Email.

Remote ID

Enter the remote user’s IP address, URL, or

 

email address.

Key Management

Select:

 

IKE to use Internet Key Exchange Protocol.

 

Click the Advanced button to configure IKE

 

(see page 67).

 

Manual to enter encryption and authentication

 

keys.

64

Zoom AP+4 User Guide