If you selected ASCII and you chose a 64-bit key length, write your 5-ASCII-character key in the space below for future reference, and then enter the key in the Encryption Key 1 box.

— — — — —

Click Finished, and at the Settings changed successfully! message, click OK.

Your basic setup is complete. You don’t need to keep the AP+4 plugged into the setup computer.

•If you are using the AP+4 as a Router/Access Point, your broadband modem is already connected. You can plug up to four computers, game consoles, or other devices into the AP+4’s LAN ports. The AP+4 can also link wireless devices to your network.

•If you are using the AP+4 as a Repeater, you can unplug the computer from the AP+4’s LAN port and locate the AP+4 near the edge of the wireless network you want to extend.

•If you are using the AP+4 as an Ethernet Client or Wireless ISP to provide access to your wireless network, you can plug up to four computers, game consoles, or other devices into the AP+4’s LAN ports.

If you decide that you want to make changes to any of the parameters you have configured using the Setup Wizard, turn to Chapter 3, Operating Mode. Continue with Chapter 4, Wireless Configuration, and Chapter 5, TCP/IP Settings.

Chapter 1. Installing the AP+4

15