Dialer
Phone
Jack
Power
Cube
12
Dialer Cord (short)
Note: If the dialer’s LED remains on solidly (i.e., does not blink), plug the dialer cord into the dialer’s phone jack 1. This is very important.
If you’d like, you can mount the dialer on your wall using the self-adhesive pad provided, or you can use screws if you prefer. To use the self-adhesive pad, peel off the tape on both sides of the pad, stick the pad to the bracket on the slightly smaller side with holes, and then attach the bracket to the wall. Instead of using the pad, you can attach the bracket with two ¾” #6 flathead wood screws, available in any hardware store.
