Getting Started
Thank you for purchasing our dialer. Before you begin installing it, you should read the section below.
How the Dialer Works
The dialer simplifies using calling cards by dialing all the extra numbers automatically. When you first install the dialer, or when you get a new prepaid phone card, you set up the dialer using LearnMode™. You can use the dialer in one of two basic ways:
1)Automatic Mode: If you want the dialer to automatically route all North American or international toll calls using your prepaid phone card; or
2)Manual Mode: If you only want the dialer to route calls using your prepaid phone card when you come off- hook and dial *. The dialer assumes you want Manual Mode unless you use a command to select Automatic Mode.
There is a special kind of Manual Mode that lets you assign keys for up to seven different users or calling cards.
Setting up and using the dialer involves these easy steps:
1.Install the dialer.
2.Once the dialer is installed, use LearnMode or Advanced LearnMode™ to teach your dialer how to make calls using your calling card.
3.If you wish, use Settings to tailor the dialer to your desired use. For instance, you can select Automatic Mode and change the DTMF tone settings.
4.Use the dialer.
Getting Started | 3 |
