Chapter 6 - Leased Line Operation
6-2
originator and the other as the answerer. You can set this manually or
automatically.

Manual Connect

Set the modem to leased-line mode. Type the asynchronous command ATD to the
originating modem and ATA to the answering. Use AT*Mn or set S14b0 to select
originate or answer mode.

Auto Handshake

If you want handshaking to occur automatically upon power-up, you have to save
the leased-line configuration to the power-on profile. How to designate a profile
to be a power-on profile is described in Chapter 3. Please remember to set the
handshake mode before you save the configuration. Be sure that one modem is set
to originate mode and the other to answer mode.
AT-Command Description
AT*M0 When operating over a leased line, modem
will handshake in originate mode. (Default)
AT*M1 When operating over a leased line, modem
will handshake in answer mode.
Terminating a Leased Line Connection
Pressing the DATA/VOICE switch on the Omni 288S will switch the modem
on/off the connected leased line.