Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

 

Menu 21.5 – Filter Rules Summary

# A Type

Filter Rules

M m n

- -

---- --------------------------------------------------------------- - - -

1

Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=161

N D F

2

N

 

 

3

N

 

 

4

N

 

 

5

N

 

 

6

N

 

 

Enter Filter Rule Number (1-6) to Configure:

Figure 7-7 SNMP_WAN Filter Rules Summary

7.2.1 Filter Rules Summary Menu

This screen shows the summary of the existing rules in the filter set. The following tables contain a brief description of the abbreviations used in the previous menus.

 

Table 7-1 Abbreviations Used in the Filter Rules Summary Menu

 

 

 

FIELD

 

DESCRIPTION

 

 

 

#

 

The filter rule number: 1 to 6.

 

 

 

A

 

Active: “Y” means the rule is active. “N” means the rule is inactive.

 

 

 

Type

 

The type of filter rule: “GEN” for Generic, “IP” for TCP/IP.

 

 

 

Filter Rules

 

These parameters are displayed here.

 

 

 

M

 

More.

 

 

“Y” means there are more rules to check which form a rule chain with the present rule.

 

 

An action cannot be taken until the rule chain is complete.

 

 

“N” means there are no more rules to check. You can specify an action to be taken

 

 

i.e., forward the packet, drop the packet or check the next rule. For the latter, the next

 

 

rule is independent of the rule just checked.

 

 

 

m

 

Action Matched.

 

 

“F” means to forward the packet immediately and skip checking the remaining rules.

 

 

“D” means to drop the packet.

 

 

“N“ means to check the next rule.

 

 

 

n

 

Action Not Matched.

 

 

“F” means to forward the packet immediately and skip checking the remaining rules.

 

 

“D” means to drop the packet.

 

 

“N” means to check the next rule.

7-6

Filter Configuration