Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

The following figure shows how you apply NAT to the remote node in menu 11.1.Step 1. Enter 11 from the main menu.

Step 2. Move the cursor to the Edit IP field, press the [SPACE BAR] to select Yes and then press Step 3. [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address: N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= Full Feature

Metric= 1

Private= No

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 4-4 Menu 11.3 — Applying NAT to the Remote NodeThe following table describes the options for Network Address Translation.

 

 

Table 4-3 Applying NAT in Menus 4 & 11.3

 

 

 

FIELD

OPTIONS

DESCRIPTION

 

 

 

Network

Full

When you select this option the SMT will use Address Mapping Set 1

Address

Feature

(menu 15.1 - see section 4.3.1 for further discussion). You can configure

Translation

 

any of the mapping types described in Table 4-2. Choose Full Feature if

 

 

you have multiple public WAN IP addresses for your Prestige.

 

None

NAT is disabled when you select this option.

 

SUA Only

When you select this option the SMT will use Address Mapping Set 255

 

 

(menu 15.1 - see section 4.3.1). Choose SUA Only if you have just one

 

 

public WAN IP address for your Prestige.

 

 

 

NAT

4-7