ZyXEL Communications 314 PLUS Table 3-5IP Alias Setup Menu Fields, Figure 3-5Menu 3.2.1 — IP Alias Setup

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

Menu 3.2.1 - IP Alias Setup

IP Alias 1= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

IP Alias 2= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 3-5 Menu 3.2.1 — IP Alias Setup

Follow the instructions in the table shown next to configure IP Alias parameters.

Table 3-5 IP Alias Setup Menu Fields

FIELD	DESCRIPTION	EXAMPLE
IP Alias	Choose Yes to configure the LAN network for the Prestige.	Yes
IP Address	Enter the IP address of your Prestige in dotted decimal notation	192.168.2.1
IP Subnet Mask	Your Prestige will automatically calculate the subnet mask based on	255.255.255.0
	the IP address that you assign. Unless you are implementing
	subnetting, use the subnet mask computed by the Prestige.
RIP Direction	Press the [SPACE BAR] to select the RIP direction.	None
	Options are None, Both, In Only or Out Only.
Version	Press the [SPACE BAR] to select the RIP version.	RIP-1
	Options are RIP-1, RIP-2Bor RIP-2M.
Incoming	Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters	between this node and the Prestige.

Internet Access 3-9