ZyXEL Communications 314 PLUS 3.3.2 PPTP Encapsulation, The following table describes this screen, Table 3-6Internet Access Setup Menu Fields

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

The following table describes this screen.

	Table 3-6 Internet Access Setup Menu Fields
FIELD	DESCRIPTION
ISP’s Name	Enter the name of your Internet Service Provider, e.g., myISP. This
	information is for identification purposes only.
Encapsulation	Press the [SPACE BAR] and then press [ENTER] to choose Ethernet. The
	encapsulation method influences your choices for IP Address.
Service Type	This is applicable only when you choose Ethernet as your encapsulation
	method. Press the [SPACE BAR] to select Standard, RR-Toshiba
	(RoadRunner Toshiba authentication method), RR-Manager(RoadRunner
	Manager authentication method) or RR-Telstra(RoadRunner Telstra
	authentication method). Choose a RoadRunner service type if your ISP is
	Time Warner's RoadRunner; otherwise choose Standard.

Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My Password fields are not applicable in this case.

My Login	Enter the login name given to you by your ISP.
My Password	Enter the password associated with the login name above.
Login Server IP	The Prestige will find the RoadRunner Server IP if this field is left blank. If it
	does not, then you must enter the authentication server IP address.
IP Address Assignment	If your ISP did not assign you a fixed IP address, select Dynamic, otherwise
	select Static and enter the IP address & subnet mask in the following fields.
IP Address	Enter the (fixed) IP address assigned to you by your ISP (Static IP Address
	Assignment is selected in the previous field).
IP Subnet Mask	Enter the subnet mask associated with your static IP.
Gateway IP Address	Enter the gateway IP address associated with your static IP.
Network Address	Refer to the following chapter for a more detailed discussion on the Single
Translation	User Account and NAT. Options are SUA only, Full Feature or None.

Once you have finished configuring a rule in this menu, press [ENTER] at the message “Press ENTER to Confirm…” to save your configuration, or press [ESC] to cancel.

3.3.2 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfer of data from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-based networks.

Internet Access 3-11