ZyXEL Communications 314 PLUS Table 5-1Fields in Menu 11.1 (Ethernet Encapsulation), Figure 5-1Menu 11.1 Remote Node Profile for Ethernet Encapsulation

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

		Menu 11.1 - Remote Node Profile
		Rem Node Name= ChangeMe	Route= IP
		Active= Yes
		Encapsulation= Ethernet	Edit IP= No
		Service Type= Standard	Session Options:
		Service Name= N/A	Edit Filter Sets= No
		Outgoing:	Edit Traffic Redirect= No
		My Login= N/A
		My Password= N/A
		Server IP= N/A
		Press ENTER to Confirm or ESC to Cancel.
	Figure 5-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
		Table 5-1 Fields in Menu 11.1 (Ethernet Encapsulation)
FIELD		DESCRIPTION		EXAMPLE
Rem Node		Enter a descriptive name for the remote node. This field can be		LAoffice
Name		up to eight characters.
Active		Press [SPACE BAR] to select Yes (activate remote node) or No		Yes
		(deactivate remote node).
Encapsulation		Ethernet is the default encapsulation. Press the [SPACE BAR] if		Ethernet
		you wish to change to PPPoE or PPTP encapsulation.
Service Type		Press [SPACE BAR] to select from Standard, RR-Toshiba		Standard
		(RoadRunner Toshiba authentication method), RR-Manager
		(RoadRunner Manager authentication method) or, RR-Telstra
		(RoadRunner Telstra authentication method). Choose one of the
		RoadRunner methods if your ISP is Time Warner's RoadRunner;
		otherwise choose Standard.

Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My

Password fields are not applicable in this case.

Service Name	This is valid only when you have chosen PPPoE encapsulation.	poellc
	If you are using PPPoE encapsulation, then type the name of
	your PPPoE service here.
Outgoing

5-2 Remote Node Setup