Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

Example of FTP Commands from the DOS Prompt

331 Enter PASS command Password:

230 Logged in ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit

Figure 12-2 FTP Session ExampleFTP GUI Clients

The following table describes some of the commands that you may see in FTP GUI clients.

Table 12-2 General Commands for GUI Clients

 

 

COMMAND

DESCRIPTION

 

 

Host Address

Enter the address of the host server.

 

 

Login Type

Anonymous.

 

This is when a user I.D. and password is automatically supplied to the

 

server for anonymous access. Anonymous logins will work only if your

 

ISP or service administrator has enabled this option.

 

Normal.

 

The server requires a unique User ID and Password to login.

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

 

Initial Remote Directory

Specify the default remote directory (path).

 

 

Initial Local Directory

Specify the default local directory (path).

 

 

TFTP and FTP over WAN Will Not Work WhenTelnet service is disabled in menu 24.11.

A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block Telnet service.

12-4

Firmware and Configuration Maintenance