Prestige 652 ADSL Security Router

The Prestige also supports Full Feature NAT to map multiple global IP addresses to multiple private LAN IP addresses of clients or servers using mapping types as outlined in Table 8-2.

1.Choose SUA Only if you have just one public WAN IP address for your Prestige.

2.Choose Full Feature if you have multiple public WAN IP addresses for your Prestige.

8.2.2 Applying NAT

You apply NAT via menus 4 or 11.3 as displayed next. The next figure shows you how to apply NAT for Internet access in menu 4. Enter 4 from the main menu to go to Menu 4 - Internet Access Setup.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= RFC-1483

Multiplexing= LLC-based

VPI #= 0

VCI #= 35

ATM QoS Type= CBR

Peak Cell Rate (PCR)= 0

Sustain Cell Rate (SCR)= 0

Maximum Burst Size (MBS)= 0

My Login= N/A

My Password= N/A

ENET ENCAP Gateway= N/A

IP Address Assignment= Static

IP Address= 0.0.0.0

Network Address Translation= SUA Only

Address Mapping Set= N/A

Figure 8-3 Menu 4 — Applying NAT for Internet Access

The following figure shows how you apply NAT to the remote node in menu 11.1. Step 1. Enter 11 from the main menu.

Step 2. Move the cursor to the Edit IP field, press [SPACE BAR] to select Yes and then press

[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.

8-6

NAT