
Prestige 652 ADSL Security Router
FIELD | DESCRIPTION | EXAMPLE |
Service Name | When using PPPoE encapsulation, type the name of your PPPoE | N/A |
| service here. |
|
Incoming: | Type the login name that this remote node will use to call your |
|
Rem Login | Prestige. The login name and the Rem Password will be used to |
|
authenticate this node. |
| |
|
| |
Rem Password | Type the password used when this remote node calls your |
|
| Prestige. |
|
|
|
|
Outgoing: | Type the login name assigned by your ISP when the Prestige calls |
|
My Login |
| |
this remote node. |
| |
|
| |
|
|
|
My Password | Type the password assigned by your ISP when the Prestige calls |
|
| this remote node. |
|
|
|
|
Authen | This field sets the authentication protocol used for outgoing calls. |
|
| Options for this field are: |
|
| CHAP/PAP – Your Prestige will accept either CHAP or PAP when |
|
| requested by this remote node. |
|
| CHAP – accept CHAP (Challenge Handshake Authentication |
|
| Protocol) only. |
|
| PAP – accept PAP (Password Authentication Protocol) only. | PAP |
| ||
|
|
|
Route | This field determines the protocol used in routing. Options are IP | IP |
| and None. |
|
Bridge | When bridging is enabled, your Prestige will forward any packet | No |
| that it does not route to this remote node; otherwise, the packets |
|
| are discarded. Select Yes to enable and No to disable. |
|
Edit IP/Bridge | Press [SPACE BAR] to select Yes and press [ENTER] to display | No |
| Menu 11.3 – Remote Node Network Layer Options. |
|
Edit ATM Options | Press [SPACE BAR] to select Yes and press [ENTER] to display | No |
| Menu 11.6 – Remote Node ATM Layer Options. |
|
Telco Option | This sets a ceiling for outgoing call time for this remote node. The | 0 |
Allocated Budget | default for this field is 0 meaning no budget control. | (default) |
|
| |
(min) |
|
|
|
|
|
Period (hr) | This field is the time period that the budget should be reset. For | 0 |
| example, if we are allowed to call this remote node for a maximum | (default) |
| of 10 minutes every hour, then the Allocated Budget is (10 |
|
| minutes) and the Period (hr) is 1 (hour). |
|
Remote Node Configuration |