ZyXEL Communications 652 Table 5-2Remote Node Network Layer Options, Figure 5-3Remote Node Network Layer Options

Prestige 652 ADSL Security Router

Menu 11.3 - Remote Node Network Layer Options

IP Options:	Bridge Options:
IP Address Assignment= Static	Ethernet Addr Timeout(min)= 0
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set=2
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies= 3,4,5,6

Press ENTER to Confirm or ESC to Cancel:

Figure 5-3 Remote Node Network Layer Options

The next table explains fields in Menu 11.3 – Remote Node Network Layer Options.

Table 5-2 Remote Node Network Layer Options

FIELD	DESCRIPTION	EXAMPLE
IP Address	Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote	Static
Assignment	node is using a dynamically assigned IP address, or Static if it is using
	a static (fixed) IP address. You will only be able to configure this in the
	ISP node (also the one you configure in menu 4), all other nodes are
	set to Static.
Rem IP Addr	This is the IP address you entered in the previous menu.
Rem Subnet	Type the subnet mask assigned to the remote node.
Mask
My WAN Addr	Some implementations, especially UNIX derivatives, require separate
	IP network numbers for the WAN and LAN links and each end to have a
	unique address within the WAN network number. In that case, type the
	IP address assigned to the WAN port of your Prestige.
	NOTE: Refers to local Prestige address, not the remote router address.
NAT	Press [SPACE BAR] and then [ENTER] to select Full Feature if you	SUA
(Network	have multiple public WAN IP addresses for your Prestige. Select SUA	Only
Address	Only if you have just one public WAN IP address for your Prestige. The
Translation)	SMT uses Address Mapping Set 255 (menu 15.1 - see section 8.3.1).
	Select None to disable NAT.
Address	When Full Feature is selected in the NAT field, configure address	2

5-6 Remote Node Configuration