Prestige 652 ADSL Security Router

Step 2. The following screen indicates that the Xmodem download has started.

You can enter ctrl-x to terminate operation any time.

Starting XMODEM download...

Figure 19-4 System Maintenance — Starting Xmodem Download Screen

Step 3. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the following screen.

Type a location for storing the configuration file or click Browse to look for one.

Choose the Xmodem protocol.

Then click Receive.

Figure 19-5 Backup Configuration Example

Step 4. After a successful backup you will see the following screen. Press any key to return to the SMT menu.

**Backup Configuration completed. OK.

### Hit any key to continue.###

Figure 19-6 Successful Backup Confirmation Screen

19.3 Restore Configuration

This section shows you how to restore a previously saved configuration. Note that this function erases the current configuration before restoring a previous back up configuration; please do not attempt to restore unless you have a backup configuration file stored on disk.

FTP is the preferred method for restoring a previously saved configuration to your Prestige since FTP is faster. Please note that you must wait for the system to automatically restart after the file transfer is complete.

Firmware and Configuration File Maintenance

19-7