Prestige 652 ADSL Security Router

 

 

 

 

 

 

 

Menu 11.1 - Remote Node Profile

 

 

 

 

 

 

 

Rem Node Name= ChangeMe

Route= IP

 

 

 

 

Active= Yes

Bridge= No

 

 

 

 

Encapsulation= PPP

Edit IP/Bridge= No

 

 

 

 

Multiplexing= LLC-based

Edit ATM Options= No

 

 

 

 

Service Name= N/A

Telco Option:

 

 

 

 

Incoming:

 

 

 

 

Rem Login=

Allocated Budget(min)= 0

 

 

 

 

Rem Password= ********

Period (hr)= 0

 

 

 

 

Outgoing:

Schedule Sets= N/A

 

 

 

 

My Login=

Nailed-Up Connection= N/A

 

 

 

 

My Password= ********

Session Options:

 

 

 

 

Authen= CHAP/PAP

Edit Filter Sets= No

 

 

 

 

 

Idle Timeout (sec)= 0

 

 

 

 

Press ENTER to Confirm or ESC to Cancel:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 5-2 Menu 11.1 — Remote Node Profile

In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.

Table 5-1 Remote Node Profile Menu Fields

FIELD

DESCRIPTION

EXAMPLE

Rem Node Name

Type a unique, descriptive name of up to eight characters for this

ChangeMe

 

node.

 

Active

Press [SPACE BAR] and then [ENTER] to select Yes to activate or

Yes

 

No to deactivate this node. Inactive nodes are displayed with a

 

 

minus sign “–“.

 

Encapsulation

RFC-1483is the default configuration, press [SPACE BAR] and

PPPoA

 

then [ENTER] to select either PPPoE, PPPoA (RFC-2364, PPP

 

 

Encapsulation over ATM Adaptation Layer 5) or ENET ENCAP.

 

 

PPPoA refers to RFC-2364 (PPP Encapsulation over ATM Adaptation

 

 

Layer 5).

 

 

PPPoE refers to RFC-2364 (Point-to-Point Protocol over Ethernet).

 

 

If RFC-1483(Multiprotocol Encapsulation over ATM Adaptation

 

 

Layer 5) or ENET ENCAP is selected, then the Rem Login, Rem

 

 

Password, My Login, My Password, Telco Options and Idle

 

 

Timeout fields are not applicable (N/A).

 

Multiplexing

Press [SPACE BAR] and then [ENTER] to select the method of

LLC-based

 

multiplexing that your ISP uses, either VC-basedor LLC-based.

 

Remote Node Configuration

5-3