Prestige 652 ADSL Security Router

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 2-2 Main Menu Commands

OPERATION

 

KEYSTROKE

 

DESCRIPTION

 

Move down to

 

[ENTER]

 

To move forward to a submenu, type in the number of the desired

 

another menu

 

 

 

submenu and press [ENTER].

 

 

 

 

 

 

 

Move up to a

 

[ESC]

 

Press [ESC] to move back to the previous menu.

 

previous menu

 

 

 

 

 

 

 

 

 

 

 

Move to a “hidden”

 

Press [SPACE

 

Fields beginning with “Edit” lead to hidden menus and have a

 

menu

 

BAR] to change No

 

default setting of No. Press [SPACE BAR] once to change No to

 

 

 

to Yes then press

 

Yes, then press [ENTER] to go to the “hidden” menu.

 

 

 

[ENTER].

 

 

 

 

 

 

 

 

 

Move the cursor

 

[ENTER] or

 

Within a menu, press [ENTER] to move to the next field. You can

 

 

 

[UP]/[DOWN] arrow

 

also use the [UP]/[DOWN] arrow keys to move to the previous

 

 

 

keys.

 

and the next field, respectively.

 

 

 

 

 

 

 

Entering

 

Type in or press

 

You need to fill in two types of fields. The first requires you to type

 

information

 

[SPACE BAR], then

 

in the appropriate information. The second allows you to cycle

 

 

 

press [ENTER].

 

through the available choices by pressing [SPACE BAR].

 

 

 

 

 

 

 

Required fields

 

<?>

 

All fields with the symbol <?> must be filled in order to be able to

 

 

 

 

 

save the new configuration.

 

N/A fields

 

<N/A>

 

Some of the fields in the SMT will show a <N/A>. This symbol

 

 

 

 

 

refers to an option that is Not Applicable.

 

Save your

 

[ENTER]

 

Save your configuration by pressing [ENTER] at the message

 

configuration

 

 

 

“Press ENTER to confirm or ESC to cancel”. Saving the data on

 

 

 

 

 

the screen will take you, in most cases to the previous menu.

 

Exit the SMT

 

Type 99, then press

Type 99 at the main menu prompt and press [ENTER] to exit the

 

 

 

[ENTER].

 

SMT interface.

 

 

 

 

 

 

 

After you enter the password, the SMT displays the main menu, as shown next.

Hardware Installation and Initial Setup

2-11