Prestige 652 ADSL Security Router

LLC-based Multiplexing or PPPoA or PPPoE Encapsulation

For LLC-basedmultiplexing or PPP or PPPoE encapsulation, one VC carries multiple protocols with protocol identifying information being contained in each packet header.

Menu 11.6 - Remote Node ATM Layer Options

VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)

VPI #= 8

VCI #= 35

ATM QoS Type= UBR

Peak Cell Rate (PCR)= 5400

Sustain Cell Rate (SCR)= 0

Maximum Burst Size (MBS)= 0

ENTER here to CONFIRM or ESC to CANCEL:

.

Only one set of VPI and VCI numbers needs to be specified.

Figure 6-2 Menu 11.6 for LLC-based Multiplexing or PPPoA or PPPoE Encapsulation

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM traffic).

The following figure uses sample IP addresses to help you understand the field of My Wan Addr in menu

11.3.Refer to the previous figure LAN and WAN IPs for a brief review of what a WAN IP is. My WAN Addr indicates the local Prestige WAN IP while Rem IP Addr indicates the peer WAN IP.

6-2

Remote Node TCP/IP Configuration