
Prestige 782R G.SHDSL Router
FIELD |
| DESCRIPTION | EXAMPLE |
Client IP Pool | This field specifies the first of the contiguous addresses in the IP address | 192.168.1.33 | |
Starting Address | pool. |
|
|
Size of Client IP | This field specifies the size, or count of the IP address pool. | 32 | |
Pool |
|
|
|
|
|
|
|
Primary DNS Type the IP addresses of the DNS servers. The DNS servers are passed to Server the DHCP clients along with the IP address and the subnet mask.
Secondary DNS Server
Remote DHCP If Relay is selected in the DHCP field above, then type the IP address of Server the actual, remote DHCP server here.
The following table will show you how to configure the TCP/IP fields.
TableFIELD | DESCRIPTION | EXAMPLE |
TCP/IP Setup |
|
|
|
|
|
IP Address | Type the IP address of your Prestige in dotted decimal notation. | 192.168.1.1 |
|
| (default) |
IP Subnet Mask | Your Prestige will automatically calculate the subnet mask based on the | 255.255.255.0 |
| IP address that you assign. Use the subnet mask computed by the | (default) |
| Prestige unless you are implementing subnetting. |
|
RIP Direction | Press [SPACE BAR] to select the RIP Direction from Both/None/In | Both |
| Only/Out Only. | (default) |
Version | Press [SPACE BAR] to select the RIP version: | |
|
| (default) |
Multicast | Turn on/off IGMP support and select the version from | |
| None. This field is disabled if DHCP field is set at Client. | (default) |
IP Policies | You can apply up to four IP Policy sets (from twelve) by typing their | 3 |
| numbers separated by commas, e.g., 3, 4, 6, 11. |
|
|
|
|
Edit IP Alias | Please refer to the following section. |
|
|
|
|
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Internet Access |