Prestige 782R G.SHDSL Router

Menu 11.3 - Remote Node Network Layer Options

IP Options:

IPX Options:

Rem IP Addr: 0.0.0.0

Rem LAN Net #= N/A

Rem Subnet Mask= 0.0.0.0

My WAN Net #= N/A

My WAN Addr= 0.0.0.0

Hop Count= N/A

Single User Account= No

Tick Count= N/A

Metric= 2

 

Private= No

 

RIP Direction= Both

Bridge Options:

Version= RIP-2B

Ethernet Addr Timeout (min)= 0

Multicast= IGMP-v2

 

IP Policies=

 

Press ENTER to Confirm or ESC to Cancel:

Figure 4-4 Remote Node Network Layer Options

The next table shows you how to configure remote node network layer options.

Table 4-3 TCP/IP-related Fields in Menu 11.1 – Remote Node Profile

FIELD

DESCRIPTION

EXAMPLE

Route

Make sure IP is among the protocols in this field.

 

 

 

 

Rem IP Addr

Type the remote gateway IP address in Remote Node Profile. For a

 

 

valid IP address, fill in either the remote Prestige WAN IP address or

 

 

the remote Prestige LAN IP address depending on the remote WAN

 

 

IP settings. For example, if the remote WAN IP is set at 192.168.3.1,

 

 

then type 192.168.3.1 in the Rem IP Addr field. If the remote WAN

 

 

IP is 0.0.0.0, then type 192.168.1.1 in the Rem IP Addr field.

 

Edit IP/IPX/

Press [SPACE BAR] to select Yes and press [ENTER] to display

Yes/No

Bridge

Menu 11.3 – Remote Node Network Layer Options menu.

 

4-6

Remote Node Configuration