
Prestige 782R G.SHDSL Router
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes |
|
IP Protocol= 6 | IP Source Route= No |
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None | |
TCP Estab= No |
|
More= No | Log= None |
Action Matched= Drop
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
FigureThe following table describes how to configure your TCP/IP filter rule.
TableFIELD | DESCRIPTION | OPTIONS |
Filter # | This is the filter set, filter rule coordinates, i.e., 2, 3 refers |
|
| to the second filter set and the third filter rule of that set. |
|
Filter Type | Use [SPACE BAR] to toggle between types of rules. | TCP/IP Filter Rule/ |
| Parameters displayed for each type will be different. | Generic Filter Rule/ |
|
| IPX Filter Rule |
Active | This field activates/deactivates the filter rule. | Yes/No |
|
|
|
IP Protocol | This is the upper layer protocol, e.g., TCP is 6, UDP is 17 | 0 to 255 |
| and ICMP is 1. The value must be between 0 and 255. |
|
IP Source Route | If Yes, the rule applies to packet with IP source route | Yes/No |
| option; or else the packet must not have the source route |
|
| option. The majority of IP packets do not have source |
|
| route. |
|
Destination: | Type the destination IP address of the packet you want to | IP address |
IP Addr | filter. This field is ignored if it is 0.0.0.0. |
|
|
| |
|
|
|
IP Mask | Type the IP mask to apply to the Destination: IP Addr | IP mask |
|
|
|
Filter Configuration |