
Prestige 782R G.SHDSL Router
Menu 11.3 - Remote Node Network Layer Options
IP Options: | IPX Options: |
Rem IP Addr: | Rem LAN Net #= 00000000 |
Rem Subnet Mask= N/A | My WAN Net #= 00000000 |
My WAN Addr= N/A | Hop Count= 1 |
Single User Account= N/A | Tick Count= 2 |
Metric= N/A |
|
Private= N/A |
|
RIP Direction= N/A |
|
Version= N/A |
|
Multicast= N/A | Bridge Options: |
IP Policies= | Ethernet Addr Timeout(min)= N/A |
Press ENTER to Confirm or ESC to Cancel:
FigureThe following table shows the fields in Menu 11.3 – Remote Node Network Layer Options.
TableFIELD | DESCRIPTION | OPTIONS |
Rem IP Addr | This is the IP address you entered in the previous menu. |
|
|
|
|
Rem Subnet Mask | Type the subnet mask for the remote network. |
|
|
|
|
My WAN Addr | Some implementations, especially UNIX derivatives, require |
|
| separate IP network numbers for the WAN and LAN links and |
|
| each end to have a unique address within the WAN network |
|
| number. In that case, type the IP address assigned to the WAN |
|
| port of your Prestige. |
|
| NOTE: This is the address assigned to your local Prestige, not |
|
| the remote router. If the remote router is a Prestige, then this |
|
| entry determines the local Prestige Rem IP Addr in Menu 11.1. |
|
Single User | Set this field to Yes to enable the Single User Account feature | Yes/No |
Account | for your Prestige. Use [SPACE BAR] to choose between Yes |
|
| and No. See the Internet Access chapter for more information |
|
| on the Single User Account feature. |
|
|
|
|
Metric | Metric represents the “cost” of transmission for routing purposes. | 1 to 15 |
| IP routing uses hop count as the measurement of cost, with a |
|
| minimum of 1 for directly connected networks. Type a number |
|
| that approximates the cost for this link. The number need not be |
|
| precise, but it must be between 1 and 15. In practice, 2 or 3 is |
|
| usually a good number. |
|
Remote Node TCP/IP Configuration |