Prestige 782R G.SHDSL Router

From Menu 12, type 2, then select one of the IPX Static Routes to open Menu 12.2.1 – Edit IPX Static Route, as shown next.

Menu 12.2.1 - Edit IPX Static Route

Route #= 1

Server Name= ?

Active= Yes

Network #= ?

Node #= 000000000001

Socket #= 0451

Type #= 0004

Hop Count= 2

Tick Count= 3

Gateway Node= 1

Press ENTER to Confirm or ESC to Cancel:

Figure 6-6 Menu 12.2.1 – Edit IPX Static Route

The following table contains the instructions on how to configure the Edit IPX Static Route menu.

Table 6-3 Edit IPX Static Route Menu Fields

FIELD

DESCRIPTION

Route #

This is the route index number as listed in Menu 12.2 – IPX Static Route Setup.

 

 

Server Name

Type the server name. This must be the exact name configured in the NetWare server.

 

 

Active

This allows you to activate/deactivate this static route.

 

 

Network #

This is the internal network number of the remote server you want to access.

 

[00000000] and [FFFFFFFF] are reserved.

Node #

This is the address of the node on which the server resides. For a Novell IPX

 

implementation, the value is [000000000001].

Socket #

The server will receive service requests on this socket. The default is hex [0451].

 

 

Type #

This identifies the type of service the server provides. The default is hex [0004].

 

 

Hop Count

This is the number of intermediate networks that must be passed through to reach the

 

remote node.

Tick Count

This indicates the time-ticks required to reach the remote node.

 

 

Gateway Node

Type the remote node number that is the gateway for this static route.

 

 

When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

IPX Configuration

6-7