Prestige 782R G.SHDSL Router

FIELD

DESCRIPTION

OPTIONS

 

field.

 

Port #

Type the destination port of the packets you want to filter.

0 to 65535

 

The field range is 0 to 65535. A 0 field is ignored.

 

 

 

 

Port # Comp

Select the comparison to apply to the destination port in

None/Less/Greater/

 

the packet against the value given in Destination: Port #.

Equal/Not Equal

Source:

Type the source IP Address of the packet you want to

IP address

IP Addr

filter. A 0.0.0.0 field is ignored.

 

 

 

 

 

 

IP Mask

Type the IP mask to apply to the Source: IP Addr field.

IP mask

 

 

 

Port #

Type the source port of the packets you want to filter. The

0 to 65535

 

range of this field is 0 to 65535. A 0 field is ignored.

 

Port # Comp

Select the comparison to apply to the source port in the

None/Less/Greater/

 

packet against the value given in Source: Port # field.

Equal/Not Equal

TCP Estab

This applies only when the IP Protocol field is 6, TCP. If

Yes/No

 

Yes, the rule matches packets that want to establish TCP

 

 

connection(s) (SYN=1 and ACK=0); else it is ignored.

 

More

If Yes, a matching packet is passed to the next filter rule

Yes/No

 

before an action is taken; or else the packet is disposed of

 

 

according to the action fields.

 

 

If More is Yes, then Action Matched and Action Not

 

 

Matched will be N/A.

 

Log

Select the logging option from the following:

 

 

None – No packets will be logged.

None

 

Action Matched – Only packets that match the rule

Action Matched

 

parameters will be logged.

Action Not

 

 

 

Action Not Matched – Only packets that do not match

Matched

 

the rule parameters will be logged.

Both

 

Both – All packets will be logged.

 

 

 

 

 

Action Matched

Select the action for a matching packet.

Check Next Rule/

 

 

Forward/Drop

Action Not Matched

Select the action for a packet not matching the rule.

Check Next Rule/

 

 

Forward/Drop

When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

8-8

Filter Configuration