Prestige 782R G.SHDSL Router

Chapter 4

Remote Node Configuration

This chapter covers the parameters that are protocol-independent. The protocol-dependent configuration (TPP/IP, IPX and Bridging) is covered in the next chapters.

A remote node is required for placing calls to a remote gateway. A remote node represents both the remote gateway and the network behind it across a WAN connection. When you use Menu 4 to set up Internet access, you are configuring one of the remote nodes.

4.1Remote Node Setup

This section describes the protocol-independent parameters for a remote node.

4.1.1 Remote Node Profile

To configure a remote node, follow these steps:

Step 1. From the Main Menu, select menu option 11 Remote Node Setup.

Step 2. When Menu 11 appears as shown in the following figure, type the number of the remote node that you want to configure.

 

Menu 11 - Remote Node Setup

1.

ChangeMe (ISP)

2.

________

3.

________

4.

________

5.

________

6.

________

7.

________

8.

________

9.

________

10.

________

11.

________

12.

________

Enter Node # to Edit:

Figure 4-1 Menu 11 – Remote Node Setup

Remote Node Configuration

4-1