ZyXEL Communications omni.net LCD series Install your TA via a Serial Port RS-232 Interface

Step 4.

Step 3.

Step 2.

omni.net LCD series Quick Start Guide

2.Install your TA via a Serial Port (RS-232) Interface

This section instructs you to install the TA using the serial port (RS-232) interface with auto- detect or manual installation.

Step 1. Connect the serial port (RS-232) interface to your computer. Make sure your TA is on.

Did Windows detect your TA automatically? If yes, then go back to Step 3 under the heading 1. Install your TA via USB Port and follow the instructions. If Windows did not detect your TA automatically then you must install your TA manually. For manual installation, follow the instructions below.

Double-click on the My Computer icon, double-click on the Control Panel icon and then double-click on the Phone and Modem icon. Proceed to the next step.

This screen shows you what modems are installed on your computer.

Click the

Modems tab and then click “Add…” to select from a list of devices.

2-9