ZyXEL Communications omni.net LCD series quick start OT/PPP Setup for MacOS, Close and save

omni.net LCD series Quick Start Guide

OT/PPP Setup for MacOS

Before using OT/PPP, you must first use Control Panels to set up a TCP/IP, Modem and Remote Access (or PPP).

Set up the Modem Control Panel

Step 1. Choose Control Panels from Apple Menu and open the Modem control panel. You should see the Modem window shown below:

Step 2. Choose the port connected to the ZyXEL USB omni.net LCD PLUS from the “Connect via” pop-up menu.

Step 3. Choose ZyXEL ISDN PPP 64K or ZyXEL ISDN MP/PPP 128K from the “Modem” pop- up menu.

Step 4. Close and save.

Click here.

6-4