omni.net LCD series Quick Start Guide
Step 4. Highlight Microsoft, TCP/IP and then click OK.
Highlight
Microsoft.
Highlight
TCP/IP.
Click OK.
Configure TCP/IP
If TCP/IP is already installed in your computer then you may go to the next section entitled PPP Setup by ZyXel ISDN Configuration Manager. If not, follow the steps below:
Step 1. Click Start, Settings, Control Panel and then
Step 2. Select TCP/IP and then click Properties.
Step 3. Press on IP Address tab. In most cases, you have to select Obtain an IP address automatically. If you have an assigned IP address from your ISP, select Specify an IP address then enter your IP address and subnet mask.
