Omni.Net Lite User’s Guide

CHAPTER 2

Using the Utility

This chapter shows you how to access and configure the TA using the utility.

2.1 Accessing the TA with the Utility

1Make sure your TA hardware is properly connected (refer to the Quick Start Guide).

2Insert the included CD into your CD-ROM driver.

3Double-click the ConfigOmniNetLite.exe icon, as shown below, in the Utility folder of your CD.

4You will see the screen as shown below. Select Local TA and click Next to access the TA through the data port. Otherwise, select Remote TA, enter the phone number and click Next to access the remote TA via an ISDN network.

5Select Query from TA and click Next to display the current settings on the TA. Select Read from file and click Next to open a previously saved configuration file (.CFG) on

Chapter 2 Using the Utility

24