Omni.Net Lite User’s Guide

3.4.1 Phone Number Assignment

Enter AT!pS=<phone number> and press [ENTER] to assign the first phone number to the PHONE 1 port.

Enter AT!pS=<phone number> and press [ENTER] to assign the second phone number to the PHONE 2 port.

Figure 19 AT Command Example 1

3.4.2 Storing Phone Number

To store a phone number (1234567 for example) on the TA, use the AT-Zd=<phone number> [/<sub-address>]command for data calls and the AT\Zd=<phone number> [/<sub-address>]command for voice calls.

Chapter 3 Using AT Commands

62