Omni.Net Lite User’s Guide

Figure 20 AT Command Example 2

3.4.3 Setting Ports Priority

To set the same priority for both ports, enter AT\P2=0 and press [ENTER].

To set the PHONE 1 port to have the first priority, enter AT\P2=1 and press [ENTER].

To set the PHONE 2 port to have the first priority, enter AT\P2=2 and press [ENTER].

3.4.4 Disabling Call Waiting

A call waiting tone will interfere with data communication. It is highly recommended that you disable the call waiting feature on the port to which a fax or modem is connected.

To disable call waiting on either port, enter AT!1A1=0 or AT!2A1=0 and press [ENTER].

3.4.5 Link Authentication

Refer to Section 2.5.1 on page 32 for more information.

Table 17 PPP AT commands

AT COMMANDS

DESCRIPTION

 

 

AT%M1=0

Disable PAP to CHAP conversion (default).

 

 

AT%M1=1

Enable PAP to CHAP conversion.

 

 

63

Chapter 3 Using AT Commands