Omni.Net Lite User’s Guide

Figure 16 RS-232 Port: Advance Setting

The following table describes the labels in this screen.

Table 8 RS-232 Port: Advance Setting

LABEL

DESCRIPTION

 

 

Advance Options

 

 

 

Auto Answer

Set how many ringing messages the TA receives before it answers a data call

 

automatically.

 

Enter 0 to stop the TA answering a data call automatically. When there is an

 

incoming data call, you can press the push button on the top panel (see the

 

Quick Start Guide) or use the ATA command to answer it manually.

Wait for Conn

Enter the number of seconds for the TA to wait for an answer to the data call

 

before dropping it.

Power on baud rate

Configure the initial baud rate after power-on.

 

 

Power on attribute

Configure the initial attribute of the data port after power-on.

 

 

Extended result code

Select extended result code to show the extended command response or the

 

connect message to the DTE (see Table 20 on page 66). Otherwise, select

 

basic result code (default).

Ring result code

Select the information you want to display for the incoming calls. Options are

 

no extended information (default), display calling phone number, display

 

user data, display calling phone number and user data and RVS-COM

 

format.

Charge Information

 

 

 

Chapter 2 Using the Utility

42