Prestige 642 PPPoE Modem
| Table | |
|
| |
FIELD LABEL | FIELD DESCRIPTION | |
Modem Type | This field reflects the type of modem you chose in the previous screen (READ ONLY). | |
|
| |
Protocol | This field is dependent on the Modem Type field (READ ONLY) and reflects the | |
| protocol used by the modem selected in the previous screen. | |
Multiplexing | Select either VC or LLC. Obtain this information from your ISP. | |
|
| |
Virtual Circuit ID | Be sure to use the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier | |
| (VCI) numbers supplied by the telephone company. The valid range for the VPI is 0 to | |
| 255 and for the VCI is 32 to 65535 (0 to 31 is reserved for local management of ATM | |
| traffic). | |
VPI | Enter the VPI assigned to you by your ISP. | |
VCI | Enter the VCI assigned to you by your ISP. | |
|
| |
Login Settings |
| |
Service Name | Type the name of your PPPoE service here. If you do not know your Service Name | |
| then leave this field blank. | |
User Name | Enter the login name that your ISP gives you. For PPPoE encapsulation this field must | |
| be of the form user@domain.xxx where the domain identifies your ISP. | |
Password | Enter the password associated with the User Name name above. | |
Idle Timeout | 100 (default) | |
(sec) |
| |
|
|
When you have finished, click Finish to save your customized settings and exit this screen or Back to return to the previous screen without saving.
3.3.2 Wizard Setup — Modem Screen
The screen shown next appears if you selected Modem from the initial Wizard screen.
Web Configurator |